Subaru STARLINK Manual page 69

ADDING A Wi-Fi NETWORK
®
Available networks which are not displayed by searching
can be added.
1.
Display the general settings screen. (→P.62)
2.
Select (Wi-Fi Settings).
3.
Select
4.
Enter the network name, and then select
5.
Select the security type.
6.
Enter the password, and then select
7.
Check that a confirmation message appears when the
connection is complete.
(Add new network).
(Join).
(Join).
WARNING
l Use Wi-Fi devices only when safe and legal to do so.
®
l This system is fitted with Wi-Fi
implantable cardiac pacemakers, cardiac resynchronisation
therapy-pacemakers or implantable cardioverter defibrillators
should maintain a reasonable distance between themselves
and the Wi-Fi antennas. The radio waves may affect the
®
operation of such devices.
l Before using Wi-Fi devices, users of any electrical medical
®
device other than implantable cardiac pacemakers, cardiac
resynchronisation therapy-pacemakers
cardioverter defibrillators should consult the manufacturer
of the device for information about its operation under the
influence of radio waves.
Radio waves could have unexpected effects on the operation
of such medical devices.
NOTE
Communication standards:
l
• 802.11b
• 802.11g
• 802.11n (2.4GHz/5GHz*)
• 802.11a*
• 802.11ac*
*: Depending on the models, this specification may not be available.
Security:
l
• WPA
TM
• WPA2
TM
WPA and WPA2 are registered mark of the Wi-Fi Alliance
l
OTHER SETTINGS
antennas. People with
®
or implantable
.
®
69
3