PTP 250 User Guide
Connecting the PoE power supply to the drop cable
The drop cable from the ODU is connected to the DATA & POWER OUT interface of
the PoE power supply.
CAUTION
Fit an RJ45 connector (but no gland) to the PoE end of the LPU-PoE cable. Connect the
cable to the DATA & POWER OUT interface of the PoE power supply.
Figure 5-13 PoE power supply connected to LPU-PoE cable
phn-2182_002v000
May 2011
Do not dress the PoE power supply cables too tightly, as this may make the
connections unreliable.
Installing the PoE power supply
5-29