PTP 250 User Guide
Step 2: Wireless configuration
Step 2 of the Installation wizard is for updating the wireless configuration
6-16). The attributes are described in
select Next.
Figure 6-16 Step 2: Wireless Configuration page
NOTE
phn-2182_002v000
May 2011
When installing connectorized units, ensure that Antenna Gain, Cable Loss
and Maximum Power Level are within regulatory limits. For more
information, refer to
Table 6-2.
Update the attributes as required and
Calculating EIRP for connectorized units
Using the installation wizard
(Figure
on page 4-30.
6-17