Components Required With Connectorized Odus; Table 4-4 Additional Inventory For Connectorized Odus - Motorola PTP 250 User Manual

PTP 250 User Guide
Item
Drop cable tester

Components required with connectorized ODUs

Connectorized ODUs require the additional components listed in

Table 4-4 Additional inventory for connectorized ODUs

Item
Antenna
RF cable
phn-2182_002v000
May 2011
Notes
An optional item for testing the resistances
between the RJ45 pins of the drop cable.
Order from
http://www.motorola.com/ptp/support
selecting Point-to-Point, Order Cable
Tester and completing the order form.
Notes
One required per link end (or two per link
end for spatial diversity). Not supplied by
Motorola. Approved antennas are listed in
Antenna specifications
For connecting the ODU to the antenna. May
be cable of type LMR100, LMR200, LMR300,
LMR400 or LMR600. LMR400 is supplied by
Motorola:
'50 Ohm Braided Coaxial Cable - 75
meter'. Motorola part number
30010194001.
'50 Ohm Braided Coaxial Cable - 500
meter'. Motorola part number
30010195001.
Installation inventories
Table 4-4.
on page 4-14.
by
4-7