Settings
Buzzer volume
You can select one of seven different
settings for the buzzer volume.
The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.
Keypad tone
Each touch of a sensor is confirmed
with an audible tone.
Factory default setting: the keypad tone
is switched on.
Total consumption
In this setting you can check the
saved energy and water consumption
values and enter the energy cost.
Options
– Display
Shows the sum of the energy and the
sum of the water used by the
previous programmes.
– Set the cost
You can enter the cost for energy
(electricity) and water.
– Reset function
The energy consumption and water
consumption totals are reset to zero.
108
Code
The code prevents the washing
machine being used without your
knowledge.
Options
– Activate
The code is 125 and can be
activated.
When the code has been activated,
you have to enter the code after
switching the washing machine on.
Otherwise the washing machine
cannot be operated.
– Deactivate
For using the washing machine
without entering the code. This only
appears if the code has been
activated previously.
– Change
You can enter a code of your own.
Important. Make a note of your new
code. If you forget the code, the
washing machine will need to be
unlocked by your Miele dealer.
Temperature unit
The temperature can be displayed as
degrees Celsius (°C) or Fahrenheit (°F).
Factory default setting: Celsius (°C).