TwinDos
Settings for UltraPhase 1 and
UltraPhase 2
The dosage amounts for UltraPhase 1
and UltraPhase 2 are pre-set for
hardness range II ().
Compartment 1
Not defined
Miele
UltraColor
<
Touch the
Miele UltraPhase 1
The detergent type selected will be
marked with a tick
will change to the screen for setting the
.
Dosage amount
Dosage - Compartment 1
Normally soiled
–
Tip: If you live in an area with water
hardness levels I () or III (), adjust
the dosage for Miele products
according to the information given on
the packaging.
26
Miele
UltraPhase 1
Miele
WoolCare
sensor.
and the display
60
ml
+
Use the
set dosage amount or use the – and
+ sensors to change the amount.
Then confirm the new amount.
The washing machine will automatically
assign UltraPhase 2 to compartment 2.
You just need to confirm or change the
dosage amount.
Dosage - Compartment 2
>
–
Use the
set dosage amount or use the – and
+ sensors to change the amount.
Then confirm the new amount.
Touch the
main menu.
OK
OK
sensor to confirm the pre-
45
ml
Normally soiled
OK
sensor to confirm the pre-
sensor to return to the
+
OK