21-19-01 : Ip Trunk (Sip) Calling Party Number Setup For Extensions - NEC UNIVERGE SV9100 Configuration Manual

Issue 1.0
3.12
20
IP Trunk (SIP) Calling Party Number Setup for Extensions
Values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 13 Trunk (SIP) Calling Party Number Setup for Extensions

21-19-01 : IP Trunk (SIP) Calling Party Number Setup for Extensions

On a per station basis this populates the "SIP Display Info" field.This setting has
the highest priority.
This program is used to assign the Calling Party Number for each extension
(Entries: 1~0, *, #). The assigned number is sent to the SIP Trunking Service
Provider when the caller places an outgoing call. If the Calling Party Number is
assigned by both Program 21-17 and 21-18/21-19, then the system uses the data
in Program 21-18/21-19. Do not use Program 21-13 for SIP. This entry must be a
10-digit DID associated with the SIP Trunking Service Provider Account. DID
numbers are provided by your SIP Trunking Service Provider Coordinator.
SIP Trunking Service Configuration Guide
IDT/Net2Phone