IDT/Net2Phone
3.13
SIP Trunking Service Configuration Guide
DID (TN to ext map)
Values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 14 Incoming Call Trunk Setup
22-02-01 : Incoming Call Trunk Setup
Define the SIP trunks as type 3 (DID). In addition to the SIP trunk programming,
refer to the DID feature in the SV9100 Features and Specifications Manual for
additional DID programming (e.g., 14-05, 22-04, 22-09, 22-10, 22-11, 22-12,
22-13, 22-17, 34-01).
Issue 1.0
21