Operation - HITEC X2 AC Plus Black Edition Manual

Operation

Here is the detailed procedure to operate the X2 AC Plus Black Edition. All screens
and operations will take LiPo BALANCE CHARGE program for example,
Note: We will explain the operating procedure of one channel as the
Connection
Connecting to power source
There are two kinds of inputs for X2 AC Plus Black Edition, DC 11-18V and AC 100-240V.
A. Operating in AC mode
X2 AC Plus Black Edition comes with built-in switching power supply. You can
connect the AC power cord directly to the main AC socket. (100-240V AC).
Note: The output power in AC mode is 100W totally for Channel A, Channel B
and Power supply.
In AC mode, it supports Power Distribution. The total power for Channel A,
Channel B and power supply is 100W. You could set the Max Power for one output
port (Take Channel A for example) as following,
Then, the channel B and DC power supply will take the rest power automatically
(For example, if you set DC power supply as 20W and Channel A as 50W, the
Channel B will take the rest power of 30W. If Channel A / Channel B and DC power
supply are both working, you can't change the power for them. If DC power
supply is working, you can change the power of Channel A and Channel B. Thus,
the DC power supply will take the rest power automatically.
B. Operating in DC mode
Please connect X2 AC Plus Black Edition with AC / DC power supply by
supplied DC input cable. You can also use terminal clips with DC connectors to
attach directly to 12V car batteries. It is critically important that you use either
a fully charged 13.8V car battery or a high-quality AC / DC power supply in
the range of 11-18V DC output with a minimum power of 300W or higher to
insure reliable performance.
14
procedure for channel A and B is identical.
DC SUPPLY :
A
CHA:50 W
DC SUPPLY :
B
CHA:50 W
20W
CHB:30W
20W
CHB:30W