System Setting - HITEC X2 AC Plus Black Edition Manual

Charger Operation Using the App [

4. System Setting

15:53
CH. A
Battery Battery
Type Cells
2
3
4 BAL.CHARGE
LiPo
LiIon 5 CHARGER
LiFe 6 DISCHARGER
NEXT
SCAN TO GO
HOME PROGRAM
Enter into
System Setting
5. SCAN TO GO
A very unique feature of the X2 AC Plus Black Edition is SCAN TO GO
(automatic charging system). As the range of battery types and capacity
becomes more varied, each battery requires its own dedicated charging
process. Note: It is easy to set up the charger incorrectly for a specific type of
battery, resulting in battery damage or possible injury.
The revolutionary SCAN TO GO provides a solution to this problem by
allowing the user to assign a QR code. This QR code will contain all relevant
data for the battery's charging or discharging. The user can create a unique
QR code by using the LinkPower X App. Once complete, the user will print
and paste the QR code on the battery.
Use your Smartphone to launch the LinkPower X App containing all the
essential information stored in the QR code. All you need to do is press the
Scan button and the charge or discharge process will start automatically.
46
CH. B
Safety Timer
Operation
Mode
Capacity Cut-Off
Temperature Cut-Off
Rest Time Between Cycle
Charge
Discharge
DC Input Low Cut-Off
SYSTEM HOME
cont.]
15:53
CH. A CH. B
120
Min
5000
mAh
50 122
C F
10
Min
11.0
V
Balance Port Enable
PROGRAM SYSTEM
15:53
CH. A CH. B
Key Beep
Buzzer
Change Password
HOME PROGRAM SYSTEM
>