Charger Operation - HITEC X2 AC Plus Black Edition Manual

Charger Operation

The following section contains detailed procedures that must be followed to
make the charger work. When you power the charger on, it will automatically
enter the LiPo Battery balance program screen. Use the CHA/CHB button to
toggle between channels A and B and the BATT PROG/STOP button to enter the
BATT PROGRAM screen. Once in the Battery Programming section use the < or
> to select the desire battery or function then press ENTER/Start to make your
parameter adjustments. The X2 AC Plus Black Edition is capable of the following
processes based on the type of battery chosen.
Batt Operation
Type Program
CHARGE
DISCHARGE
STORAGE
LiPo
Lilon
LiFe
FAST CHG
LiHV
BAL CHARGE
CHARGE
AUTO CHG
DISCHARGE
NiMH
RE-PEAK
NiCd
CYCLE
CHARGE
Pb
DISCHARGE
18
This charging mode is for charging LiPo/LiFe/LiIon/LiHV battery in normal mode.
This mode is for discharging LiPo/LiFe/LiIon/LiHV battery.
This program is for charging or discharging
will not be used for long time.
The charging capacity may be less than normal charging but the
process time will be reduced.
This mode is for balancing the voltage of lithium-polymer battery
cells while charging .
The charger will charge NiMH and NiCd batteries using the
charge current set by the user.
In this program the charger detects the condition of the battery
which is connected to the output and automatically charges the
battery.
Note: You should set up the upper limit of the charge current to
avoid damage by excessive feeding current. Some batteries of low
resistance and capacity can lead to higher current.
This mode is for discharging NiMH/NiCd battery.
In re-peak charge mode, the charger can peak charge the
battery once, twice or three times in a row automatically. This is
good for confirming the battery is fully charged, and for checking
how well the battery receives fast charges.
1 to 5 cyclic and continuous process of charge>discharge or
discharge>charge is operable for battery refreshing and
balancing to stimulate the battery's activity.
This mode is for charging Pb battery.
This mode is for discharging Pb battery.
Description
lithium battery which