Advertisement
3) Navigate through the menu selections until you find the Normal TV or
Antenna / CATV, AIR / CABLE or Cable selection. Select Cable or CATV.
4) Exit the TV's programming menu and return to regular TV operation.
5) Verify that you can still receive a local TV channel from 2 - 13, just to
make sure you haven't really messed up the TV's operation! You should now
NOT be able to receive any UHF TV station (any channel above 14). This
proves that the TV is in cable operation mode. If you try to tune to a channel
above 14, your TV may or may not go into Auto-Channel programming, if it
does, just wait until it finishes.
6) Connect up an antenna as in step 3 in the last section.
If you are using a Handheld portable TV or variable dial type tuner TV
set:
The Cube operates on cable channel 59 which, in frequency, is
located just below the standard UHF TV channel 14. Many radio style,
variable, manual tuner style TV sets will allow you to tune down this
far. We have had good results with both the color ($99.95) and black
and white ($49.95) automobile style TV sets as well as the Sony
Watchman. Select UHF on the TV tuner switch and tune the dial to
below channel 14 to receive the Cube's signal, adjust tuning for best
reception.
USING YOUR CUBE OUTDOORS:
While your Cube 2000 has been encapsulated to protect the
precision adjustments and specialized circuits inside, the unit is not
waterproof and should be enclosed in a weatherproof housing for
outdoor use.
•
C2000
7
Advertisement
