Sp-Sdio Input/Output Expansion Module - Wieland SP-COP1 Manual

12.3.2

SP-SDIO input/output expansion module

888564875
Table 48: SP-SDIO data sheet
T (usage time)
M
Protection class
Protection type
Ambient temperature during opera-
tion
Storage temperature
Humidity
Fatigue strength
Shock resistance
• Continuous shock
• Brief shock
Electromagnetic compatibility
System connection
Power consumption via SBUS+
without currents at X1, X2
Data interface
Dimensions (W × H × L)
Weight
Terminal and connection data
Single-wire or fine-strand
Fine-strand with ferrules
as per EN 46228
AWG
Maximum tightening torque
Stripping length
Output supply (A1, A2)
Supply voltage
Type of supply voltage
Power consumption
Switch-on time
Short-circuit protective device
Wieland Electric GmbH | BA000966 | 07/2016 (Rev. C)
SP-SDIO
20 years (EN ISO 13849) 1
III (EN 61140)
Terminals: IP 20 (EN 60529)
Housing: IP 40 (EN 60529)
-25 ... +65 °C
-25 ... +70 °C
10 to 95 %, non-condensing
5 to 500 Hz/5 g (EN 60068-2-6)
10 g, 16 ms (EN 60068-2-29)
30 g, 11 ms (EN 60068-2-27)
Class A (EN 61000-6-2, EN 55011)
Terminal with screw or spring-loaded connection
max. 1.1 W
Internal bus (SBUS+)
22.5 × 96.5 × 120.8 mm
164 g (± 5%)
Screw terminal
1 x 0.2-2.5 mm 2
2
2 x 0.2-1.0 mm
1 × 0.25–2.5 mm² or 2 ×
0.25–1.0 mm²
26-14
0.5-0.6 Nm (4–5 lbf-in)
Max. 7 mm
24 V DC (16.8 to 30 V DC)
PELV or SELV
The current for the powerpack must be limited to a
maximum of 4 A – either by the powerpack itself or
by a fuse.
1W
Max. 18 s
4 A gG (with tripping characteristic B or C)
Technical data
Spring-loaded terminal
2 x 0.2-1.5 mm 2
1 × 0.25–1.5 mm²2 (tra-
pezoid crimping)
24-16
—
79