Wieland SP-COP1 Manual page 100

Error No. Error type
220101F9 Warning
220101FA Warning
220101FC Warning
22010226 Warning
22010227 Warning
22010228 Warning
22010231 Warning
22010232 Warning
22010233 Warning
22010234 Warning
22010240 Warning
22010241 Warning
22010242 Warning
22010243 Warning
22010244 Warning
22010245 Warning
22010250 Warning
2201xxxx Warning
23010001 Warning
23010003 Warning
23010005 Warning
23010007 Warning
23010009 Warning
2301000B Warning
2301000D Warning
Wieland Electric GmbH | BA000966 | 07/2016 (Rev. C)
Logbook message
Error in system configuration
Error in system configuration
Error in system configuration
Error in system configuration
Error in system configuration
Error in system configuration
Pulse period 0 must have pulse
length 0.
Pulse length must be <= pulse peri-
od/2.
Impermissible test period (permissib-
le: 0,40,200,400,600,800,1000).
Pulse length must be multiple of 4
and in range from 4 to 100ms
Maximum count of function blocks
or mapping exceeded
The number of IO modules is diffe-
rent in the configuration
The number of Gateway modules is
different in the configuration
The major version of the CPU modu-
le and project file differs.
The major version of the IO module
and project file differs.
The major version of the gateway
module and project file differs.
function blocks for presses are not
supported by this device
Error in the configuration
Processing error at I1/I2
Processing error at I3/I4
Processing error at I5/I6
Processing error at I7/I8
Processing error at I9/I10
Processing error at I11/I12
Processing error at I13/I14
System behavior Remedy
Configuration requi- Reload system confi-
red guration
Configuration requi- Reload system confi-
red guration
Configuration requi- Reload system confi-
red guration
Configuration requi- Reload system confi-
red guration
Configuration requi- Reload system confi-
red guration
Configuration requi- Reload system confi-
red guration
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
Configuration requi- Change system con-
red figuration and reload
System continues to
run
System continues to
run
System continues to
run
System continues to
run
System continues to
run
System continues to
run
System continues to
run
Appendix
100