System Setup - Wieland SP-COP1 Manual

3.2

System setup

888341643
A samosPRO COMPACT system consists of the following modules and/or components:
• One COMPACT module
• One program removable storage
• The samosPLAN5+ programming software
• Up to two gateway modules
• Up to 12 additional SP-SDIO, SP-SDI and SP-DIO input/output modules
• In addition, SP-XX expansion modules can be used. This may be for example the SA-OR-Sx
relay output expansions or the SNS4084K standstill monitor. These modules are shown in
the report from samosPLAN5+ but cannot be logically connected to the modules of the
Samos PRO COMPACT system.
Further information on positioning this module: "samosPLAN5+ software" (BA000968)
manual, section "Special case: SP-XX expansion module"
Illustration 2: Example of a minimum samosPRO system setup with SP-COP2
Illustration 3: Maximum samosPRO system setup
Wieland Electric GmbH | BA000966 | 07/2016 (Rev. C)
Product description
15