Environmentally Friendly Behavior; Disposal; Sorting Of Materials - Wieland SP-COP1 Manual

2.5

Environmentally friendly behavior

888332555
The modular samosPRO safety control is designed such that it stresses the environment as litt-
le as possible. It uses only a minimum of power and resources.
 Make sure that you also carry out work while always considering the environment.
2.5.1

Disposal

888334091
The disposal of unusable or irreparable devices should always be done in accordance with the
respectively valid country-specific waste-elimination guidelines (e.g. European Waste Code 16
02 14).
NOTICE We will be happy to help you in disposing of these devices.
Simply contact us.
2.5.2

Sorting of materials

888335627
Important information
• The sorting of materials may only be carried out by qualified persons!
• Care must be used when disassembling the devices. There is a risk of injuries during this
process.
ATTENTION
Before you can route the devices to the environmentally-friendly recycling process, it is neces-
sary to sort the various samosPRO materials.
 Separate the housing from the rest of the components (particularly from the PC board).
 Place the separated components into the corresponding recycling containers (see the
following table).
Table 1: Overview of disposal according to components
Components
Product
Housing
PC boards, cables, connectors, and
electric connecting pieces
Packaging
Cardboard, paper
Wieland Electric GmbH | BA000966 | 07/2016 (Rev. C)
Disposal
Plastic recycling
Electronics recycling
Paper/cardboard recycling
Safety
13