Initial Setup; Auto Tuner Setup; Channel Summary - JVC PD-42WX84SJ Service Manual

Auto Tuner Setup

The auto tuner setup function is described on page 27 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
To AUTO TUNER SETUP
To operate
To choose CABLE or AIR
Press the O
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized viewers from
watching any or all 181 channels.
Press the M
To CHANNEL SUMMARY
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an "". You can
delete channels from the scan by removing the "". If any
channels were missed during auto tuner setup and you wish
to add them, you may by placing an "" next to the channel
number.
To the SCAN column
Press the O
Press the M
You can block access to a channel by activating the channel lock.
Press the M
To CHANNEL SUMMARY
To operate
To the Lock Column (
Press the Z
Press the M
button
ENU
button to start
K
button
ENU
button to include or delete from scan
K
button when finished
ENU
button
ENU
)
button to lock or unlock that channel
ERO
button when finished
ENU

Initial Setup

35