Initial Setup; Auto Tuner Setup; Channel Summary - JVC PD-42V475 Service Manual

Auto Tuner Setup

The auto tuner setup function is described on page 25 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
To AUTO TUNER SETUP
π †
è
To operate
è
To choose CABLE or AIR
Press the O
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or set the channel label as you like or prevent any
unauthorized viewers from watching any or all 181 channels.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an "√". You can
delete channels from the scan by removing the "√". If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an "√" next to the
channel number.
è
To the SCAN column
π †
Press the O
Press the M
button
ENU
button to start
K
button
ENU
button to include or delete from scan
K
button when finished
ENU

Initial Setup

AUTO TUNER SETUP
TUNER MODE
PRESS TO START
OK
SELECT OPERATE
CHANNEL SUMMARY
CHNO. SCAN ID
01
02 MTV
03
04 A&E
05 E!
SELECT OPERATE
OK
CABLE
EXIT
MENU
CHNO. SCAN ID
06 HBO
07 L
08
09
10
EXIT
MENU
33