Attaching The Stand To The Tv - JVC PD-42WX84SJ Service Manual

Quick Setup
Read the following instructions and then attach the supplied stand to the TV.
WARNING:
Required items: Phillips screwdriver
1. Attach the screws (A) to the back of the TV.
2. Attach the TV to the stand.
Insert the heads of the screws (A) into the top
of the stand bar and temporarily secure the TV
to the stand.
3. Secure the TV to the stand with the screws (B).
4. Insert the cover to the stand and fix with the
screws (C).
5. Remove the paper from the bottom of the cable
clamp and attach the cable clamp to the stand.
• Clamp the system cable and power cord using the
cable clamp after connecting the system cable and
the power cord to the TV.

Attaching the stand to the TV

The TV is heavy. It should always be carried by at least two people.
Attempting to carry it by yourself may lead to it being dropped causing
injuries and damage.
Screw (A)
Screw (B) Screw (B)
Cover
Screw (C)
Cable clamp
Stand
11