Table of Contents
Advertisement
Auto Tuner Setup
If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please
skip ahead to "Channel Summary" to continue setting up your television.
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the C
HANNEL
Press the M
To AUTO TUNER SETUP
π †
è
To operate
è
To choose CABLE or AIR
To move to START
π †
è
To start Auto Tuner Setup
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Note:
• Some cable systems experience interference from radio frequencies on cable Channel 95.
You may delete this channel from your scan by removing the "X" next to it on the Channel
Summary screen shown on the next page.
• Noise Muting will not work during Auto Tuner Setup.
+/– buttons) you will receive only clear, active channels.
button
ENU
Initial Setup
�
� � � � � � � � � � � � �
� � � � � � � � � � � � � � � �
� � � � � � � � � �
� � � � �
� � � � � � � � �
� �
� �
� � � � � � � � � �
� � � � �
� � � � � � �
� � � �
17
Advertisement
Table of Contents
