Return +/Tv; Sound - JVC PD-42WX84SJ Service Manual

Return +/TV

The return+/TV button has three functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
R +/T
ETURN
The channel currently active has been programmed as your return+ channel.
Now scan through the channels using the C
R +/T
ETURN
• To cancel your return+ channel, press and hold the R
message "RETURN CHANNEL CANCELLED!" will appear.
• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel
return+.

Sound

By pressing the sound button, you can change the A.H.S. (Advanced Hyper Surround) mode,
BBE and A.H.B. (Active Hyper Bass) mode.
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.
BBE - BBE high definition audio adds natural, clear and extraordinary sound quality to any
program.
A.H.B. - You can reinforce the bass sound to maintain rich, full bass at low volumes, and
enjoy a clear sound with boosted bass.
Press the S
To select A.H.S., BBE or A.H.B.
To choose the setting
Press the M
Note: BBE is a registered trademark of BBE Sound, Inc. For U.S., licensed from
BBE Sound, Inc. under USP 4638258, 4482866 and 5510572. For Canada, licensed from
BBE Sound, Inc. BBE is a registered trademark of BBE Sound, Inc.
and hold for three seconds
V
V
You will return to your programmed channel.
button
OUND
when finished
ENU
Button Functions
RETURN CHANNEL
PROGRAMMED !
HANNEL
ETURN
+/– buttons.
+ button for three seconds. The
57