Basic Operation - JVC PD-42WX84SJ Service Manual

Quick Setup

Basic Operation

Turn the television on and off by pressing the P
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
• Turn on the TV after connecting it to the other surrounding devices. (Refer to
page 18.)
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 28 to 31 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.
Display front
Receiver front
• When the TV is off, the TV and TUNER power lamps do not light. When the TV is on, the
TV and TUNER power lamps light. However, when the POWER INDICATOR in the MENU
is set to OFF, the power lamps do not light even when the TV is on. (Refer to "POWER
INDICATOR" on page 43)
button at the top right
OWER
POWER
POWER button Power lamp
Getting Started
Remote control
sensor
Power lamp
17