Table A-28: Frequency Response Measurements; Table A-29: Waveform Distortion Measurements; Table A-30: Low Frequency Error - Tektronix VM700T User Manual

Table A–28: Frequency Response Measurements
Measurement
MultiBurst Flag
Amplitude
MultiBurst Amplitude
Table A–29: Waveform Distortion Measurements
Measurement
Baseline Distortion
2T Pulse/Bar
Ratio Error
2T Pulse
K-factor
Bar Tilt
(End Points)
Bar Tilt
(Peak-to-Peak)
Line Time Distortion
Bar Tilt (Rec 569)
Field Time Distortion
Chrominance-Luminance
Intermodulation
Luminance Non-linear
Distortion
Table A–30: Low Frequency Error
Measurement
Low Frequency Error (reported
as:
CCIR LF Error 50–550 Hz LF
Error 10–1000 Hz LF Error)
VM700T Video Measurement Set Option 11 PAL Measurements
Range Accuracy
20% to 130% of bar 0.5%
(60% nominal)
0 to 200% of flag 1.5% of flag
(100% nominal) ( 2.5% of 5.8 MHz
packet)
Range Accuracy
50% of bar 0.3%
+25% to –90% 0.5%
(0% nominal)
0 to 10% Kf 0.3% Kf
(0% Kf nominal)
0 to +40% 0.2%
(0% nominal)
0 to +40% 0.2%
(0% nominal)
0 to 40% of bar 0.2%
0 to 40% of bar 0.2%
0 to 35% 0.5%
50% 0.2%
(0% nominal)
0 to 50% 0.4%
(0% nominal)
Range
0% to 25%
(0% nominal)
Appendix A:PAL Measurement Specifications
ITS Element
C1
C2
ITS Element
B1
B1
B1
B2
B2
B2
B2
Field Square Wave
G1 or G2
D1
Accuracy
0.8%
Standard
CCIR Rec. 567
CCIR Rec. 567
Standard
CCIR Rec. 569
CCIR Rec. 569
CCIR Rec. 569
CCIR Rec. 567
CCIR Rec. 567
CCIR Rec. 560
CCIR Rec. 569
CCIR Rec. 569
CCIR Rec. 569
Standard
CCIR Rec. 569
A–9