Table of Contents
Advertisement
Section 3 - Configuration
This page displays the current information for the DIR-808L. It will display the LAN, WAN (Internet), and wireless information.
If your Internet connection is set up for a Dynamic IP address, then a Release button and a Renew button will be displayed.
Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect
to drop the PPPoE connection and use Connect to establish the PPPoE connection.
General:
Displays the router's time and firmware version.
WAN:
Displays the MAC address and the public IP settings
LAN:
Displays the MAC address and the private (local) IP settings
for the router.
Wireless.LAN:
Displays the 2.4 GHz wireless MAC address and your wireless
settings such as SSID and channel.
Wireless.LAN2:
Displays the 5 GHz wireless MAC address and your wireless
settings such as SSID and channel.
LAN.Computers:
Displays computers and devices that are connected to the
router via Ethernet and that are receiving an IP address assigned
by the router (DHCP).
IGMP.Multicast.
Shows details of current multicast connections.
Memberships:
D-Link DIR-808L User Manual
Status
Device Info
113
Advertisement
Table of Contents
