Port Forwarding - D-Link DIR-808L User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports. Tick the box next to each rule to enable that rule.
Name:
Enter a name for the rule or select an application from the drop-
down menu. Select an application and click << to populate
the fields.
IP.Address:
Enter the IP address of the computer on your local network that
you want to allow the incoming service to. If your computer is
receiving an IP address automatically from the router (DHCP),
your computer will be listed in the "Computer Name" drop-
down menu. Select your computer and click <<.
TCP/UDP:
Enter the TCP and/or UDP port or ports that you want to open.
You can enter a single port or a range of ports. Separate ports
with a comma.
Example: 24,1009,3000-4000
Schedule:
The schedule of time when the Virtual Server Rule will be
enabled. The schedule may be set to Always, which will allow
the particular service to always be enabled. You can create your
own times in the Tools > Schedules section.
Inbound.Filter:
Select Allow.All (most common) or a created Inbound filter.
You may create your own inbound filters in the Advanced >
Inbound.Filter page.
D-Link DIR-808L User Manual

Port Forwarding

83