Table of Contents
Advertisement
Section 3 - Configuration
My.IPv6.Connection:
Select Autoconfiguration.(SLAAC/DHCPv6) from the drop-
down menu.
IPv6.DNS.Settings:
Select either Obtain.DNS.server.address.automatically or
Use.the.following.DNS.Address.
Primary/Secondary.
Enter the primary and secondary DNS server addresses.
DNS.Address:
Enable.DHCP-PD:
Tick to enable DHCP-PD.
LAN.IPv6.Address:
Enter the LAN (local) IPv6 address for the router.
LAN.IPv6..
Displays the router's LAN Link-Local Address.
Link-Local.Address:
Enable.Automatic.IPv6.
Tick to enable the automatic assignment of IPv6 addresses to
address.assignment:
computers on your network.
Autoconfiguration.
Select Stateful. (DHCPv6), SLAAC. +. RDNSS, or SLAAC. +.
Type:
Stateless.DHCPv6.
IPv6.Address.
If you selected Stateful (DHCPv6) above, enter the start IPv6
Range.Start:
address for the DHCPv6 range for your local computers.
IPv6.Address.
If you selected Stateful (DHCPv6) above, enter the end IPv6
Range.End:
address for the DHCPv6 range for your local computers.
IPv6.Address.Lifetime:
Enter the IPv6 address Lifetime (in minutes).
D-Link DIR-808L User Manual
Autoconfiguration
71
Advertisement
Table of Contents
