Table of Contents
Advertisement
Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the broadband router.
Configure MAC
Select.Turn.MAC.Filtering.Off, Allow.MAC.addresses.listed.
Filtering:
below, or Deny.MAC.addresses.listed.below from the drop-
down menu.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to the
Networking Basics section in this manual.
DHCP Client:
Select a DHCP client from the drop-down menu and click << to
copy that MAC address.
Clear:
Click the Clear button to clear the MAC address and DHCP client
list fields for each line.
D-Link DIR-808L User Manual
Network Filters
87
Advertisement
Table of Contents
