Cobalt Digital Inc 9083 Product Manual page 60

3
Table 3-2 9083 Function Submenu List — continued
• Tie AES and Embedded Controls
3-12
(continued)
Applies embedded and AES unity channel selection (as set in the above
drop-down lists). To apply the selections, click the Confirm button. When
Confirm is clicked, a Confirm? pop-up appears, requesting confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
For any selection following confirm, the destination channel controls are
default reset as follows:
• Gain is to unity
• Phase control is set to Normal
• Channel is set to Unmuted
When set to Enabled, gangs Gain, Phase, and Mute controls for
same-numbered Embedded and AES channels 1 thru 8. Ganging is
bilateral, with Embedded channel control settings affecting corresponding
AES channel controls, and vice-versa.
9083 (WITH DOLBY ENCODING OPTION) PRODUCT MANUAL
9083 Function Submenu List and Descriptions
9083-ENC-OM (V4.4)