Cobalt Digital Inc 9083 Product Manual page 112

3
3-64
Using the External Metadata Source drop-down, select
A
Input Video VBI external metadata.
B
Remove VBI SMPTE 2020 metadata from the output video by setting
Metadata Removal to On .
Using the On Loss of External Metadata drop-down, select Switch to
C
Internal Metadata Controls as the failover source should the current
metadata become unavailable.
Using the Encoder Ch 1 thru Encoder Ch 8 drop-downs, map
E
AES Ch 1 thru Ch 8 to Encoder audio input channels 1 thru 8.
Using the card general audio routing controls (in this example,
F
Embedded Audio Group 1/2), set embedded channel pair 1/2 to use
the Dolby Encoder as the source.
®
Figure 3-8 Dolby E Setup Example (Sheet 2 of 2)
9083 (WITH DOLBY ENCODING OPTION) PRODUCT MANUAL
Example Setups Using The 9083 and DashBoard™
Using the Program Configuration drop-down,
D
select 5.1 + 2 as the encoding mode. The default
audio settings can be used, or the settings can be
modified as desired.
9083-ENC-OM (V4.4)