Cobalt Digital Inc 9083 Product Manual page 26

1
1-20
•
Built-in Card Edge User Interface – Using the built-in card edge
controls and display, card control settings can be set using a front
panel menu.
Note: Some of the 9083 functions described in this manual are available only when
using the DashBoard™, or Cobalt
Control Panels user interfaces.
•
DashBoard™ User Interface – Using DashBoard™, the 9083 and
other cards installed in openGear®
or HPF-9000 frame can be controlled from a computer and monitor.
DashBoard™ allows users to view all frames on a network with
control and monitoring for all populated slots inside a frame. This
simplifies the setup and use of numerous modules in a large
installation and offers the ability to centralize monitoring. Cards
define their controllable parameters to DashBoard™, so the control
interface is always up to date.
Download the free DashBoard™ software by going to
www.cobaltdigital.com and selecting "DashBoard Control and
Monitoring" on the home page. The DashBoard™ user interface is
described in Chapter 3,"Operating Instructions".
Note: If network remote control is to be used for the frame and the frame has not yet
been set up for remote control, Cobalt
User Guide (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of COMPASS
cards using DashBoard™. (Cobalt
Remote Control Panel product manuals have complete instructions for setting
up remote control using a Remote Control Panel.)
Download a copy of this guide by clicking on the Support>Documents>
Reference Guides link at www.cobaltdigital.com and then select DashBoard
Remote Control Setup Guide as a download, or contact Cobalt
Contact Cobalt Digital Inc. (p. 1-29).
• ®
Cobalt
Control Panels – The OGCP-9000, OGCP-9000/CC, and WinOGCP
Remote Control Panels conveniently and intuitively provide
parameter monitor and control of the cards within the 8321 or
HPF-9000 frame.
The remote control panels allow quick and intuitive access to
hundreds of cards in a facility, and can monitor and allow adjustment
of multiple parameters at one time.
The remote control panels are totally compatible with the openGear
control software DashBoard™; any changes made with either system
are reflected on the other.
1. openGear® is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross
Video Limited.
9083 (WITH DOLBY ENCODING OPTION) PRODUCT MANUAL
®
OGCP-9000 or OGCP-9000/CC Remote
®
reference guide Remote Control
®
OGCP-9000 and OGCP-9000/CC
OGCP-9000, OGCP-9000/CC and WinOGCP Remote
9083 Functional Description
1
frames such as the Cobalt
®
as listed in
9083-ENC-OM (V4.4)
®
8321
®
®