Cobalt Digital Inc 9083 Product Manual page 107

Operating Instructions
9083
SDI IN
Audio
De-Embed
AN-AUD IN 1
AN-AUD IN 2
9083-ENC-OM (V4.4)
In the example here, Embedded Channels 1 thru 5 are de-embedded from the
input SDI data and routed to discrete AES channels 1 thru 5. Also, an internal
tone generator (TG1) and two analog inputs are routed to AES channels 6 thru
8, respectively. Figure 3-6 (sheet 2) shows the 9083 control settings that
result in this routing.
Embed Ch 1
Embed Ch 2
Embed Ch 3
Embed Ch 4
Embed Ch 5
TG1
Analog
Ch 1
Analog
Ch 2
Figure 3-6 Audio Routing Example (Sheet 2 of 3)
9083 (WITH DOLBY ENCODING OPTION) PRODUCT MANUAL
Example Setups Using The 9083 and DashBoard™
AES Ch 1
AES OUT 1
AES Ch 2
AES Ch 3
AES OUT 2
AES Ch 4
AES Ch 5
AES OUT 3
AES Ch 6
AES Ch 7
AES OUT 4
AES Ch 8
9083ENCD_AUD_ROUTE_EX1.PNG
Using the AES Audio Out
Pairs 1-4 function, the
Source selections shown
above route the selected
sources to discrete AES
channels 1 through 8. These
discrete outputs are then
available on the 9083 card
Rear I/O Module AES OUT 1
thru AES OUT 4 BNC
connectors to be fed to the
To
console.
Console
3-59