Advertisement
86(5 ,167$//$7,21
&KDQQHO 6HDUFK 'L6(T&
1) Antenna
: Select your antenna number.
2) Satellite
: Select a satellite using
keys or if you press OK key.
Then, the list of satellite will be
displayed so that you can select
easily.
You can see the information of
the selected satellite in the right
side.
3) Position
: After selecting a satellite, please
select Position button and then
keep pressing E or W key on the
RCU until selected satellite is
locked. If the satellite is locked
correctly, the white color of signal
label bar will be changed to
yellow.
When you press OK key on the
RCU, the message of "Would you
like to set the value of current
positioner?" will be displayed for
your confirmation.
4) Transponder
: Select a transponder using
transponder List will be displayed
so that you can select easily.
5) Frequency & Symbol Rate
: If you press
RCU in this menu, command box
will be displayed. Check edit
mode by pressing OK key on the
RCU and then you can go into
those columns to change the
value.
keys or if you press OK key,
Edit key on the
-18-
Advertisement
