Advertisement
86(5 ,167$//$7,21
How to use Parent Lock
1) If you activate parent lock function, go to the TV
channel Manager Page.
2) Press Open command box and select Lock
3) Select channel the which you want to Lock
4) Press OK then
5) Exit this menu and Turn off the STB
Note : To activate Parent Lock, you have to turn
off STB once. And turn on the STB and select
channel which is locked. Then enter your
password.
+RZ WR XVH ,QVWDOO /RFN
1) Enter the current password.
2) Select ON of Install Lock
3) Enter new password
4) Confirm your new password entering
new password again
5) Exit this menu and Turn off the STB.
6) Turn on STB and press MENU
key on the RCU
7) Select any menu and press OK.
8) Then Enter Password Box will be
displayed.
9) Unless enter correct password, you can
not run any menu.
Note : Default password is 0000
Warning : Do not forget your password in
order not to fail to operate STB
)DFWRU\ 'HIDXOW
If you want to bring STB back to the factory
default condition, select Factory Default
and press OK key.
Then Warning message will be displayed.
To confirm select OK and press OK key.
Warning :
You will lose all of data and
information which was installed.
symbol is marked.
-24-
Advertisement
