Slide Appliance Into Cabinet; Adjust Fit Of Appliance In Cabinet; Remove Appliance - Thermador MES301HS Installation Instructions Manual

Slide Appliance into Cabinet



Adjust Fit of Appliance in Cabinet

The base pan has leveling legs B (see step 4) to adjust
the fit of the appliance in the cabinet. If the Trim Kit is not
flush with the cabinet face, adjust as follows:
Remove the appliance from the cabinet (see Remove
1.
Appliance).
Raise/lower the relevant leveling legs to eliminate any
2.
gap between Trim Kit and cabinet face.
Re-install the appliance in cabinet and check fit.
3.
Repeat process, if necessary.
4.

Remove Appliance

To remove appliance:
Disconnect the electrical cord from the conduit box.
1.
Open oven door.
2.
Lift appliance at front by
3.
Pull appliance out of cabinet.
4.
".
^

11