Slide Appliance into
Cabinet
7
Adjust Fit of Appliance in
Cabinet
Remove Appliance
The base pan has leveling legs B (see step 4) to adjust the fit of the appliance in the
cabinet. If the Trim Kit is not flush with the cabinet face, adjust as follows:
1. Remove the appliance from the cabinet (see Remove Appliance).
2. Raise/lower the relevant leveling legs to eliminate any gap between Trim Kit and
cabinet face.
3. Re install the appliance in cabinet and check fit.
4. Repeat process, if necessary.
To remove appliance:
1. Disconnect the electrical cord from the conduit box.
2. Open oven door.
3. Lift appliance at front by !/2".
4. Pull appliance out of cabinet.
9