Servicing Notes; Estimated Installation Time (End-User); Installation Space Requirements; Estimated Installation Time (Table 5) - Canon imageFORMULA DR-G1100 Series Service Manual

IV. Servicing Notes
A. Estimated Installation Time (End-User)
Estimated installation time shown is based on an out-of-box main unit installation
and can be completed by a Service Technician. Installation time shown is the
estimated time required for installation starting from an unpacked condition. It is
calculated based on man-hours and is provided for reference purposes only.
Excluded in the estimated installation times
• Installation space preparation
• Unit configuration

Estimated Installation Time (Table 5)

imageFORMULA DR-G1130/DR-G1100
B. Installation Space Requirements
Maintain sufficient space around this machine during operation and maintenance,
and to allow ventilation. The rear panel has a power cord and ventilation holes,
therefore do not press it against a wall.
Figure 1 (Installation Space Requirements)
Ensure that there is a clear path for bringing in the packaged machine and that
the necessary tools (trolley, etc.) are available. When packaged (including
palette), the machine weighs approximately 50.3 lbs. (22.8 kg) and measures
approximately (W x D x H) 18.9" x 21.1" x 12.4" (480 x 535 x 315 mm).
2
Installation by two (2) or more Service Technicians is required because of the weight of the machine.
imageFORMULA DR-G1130/DR-G1100 Series Service Guide
Rev. 1
imageFORMULA DR-G1130/DR-G1100 Series Service Guide
2
Item
are the following:
Estimated Installation Time
30 minutes
April 2013
Page 7