Special Tools; Consumable Parts; Special Tools List (Table 8); Consumable Parts (Table 9) - Canon imageFORMULA DR-G1100 Series Service Manual

F. Special Tools
In addition to the standard tools used to service these devices, the following
special tools should also be carried in each group of five (5) service technicians
when servicing an imageFORMULA DR-G1130/DR-G1100 Series machine.

Special Tools List (Table 8)

Description
Scale adjustment sheet
Density adjustment sheet
Test sheet
1
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
G. Consumable Parts
Consumable parts are defined as those parts having a limited yield that will be
reached during a customer's specific machine operation and should be replaced
as needed. Examples of consumable parts may include but are not limited to feed
rollers, separation rollers, etc. The consumable parts provided below show an
estimated yield to assist in the initial parts/supplies planning.
Note: All consumable parts shown in the below table are for reference purposes
only and are subject to change without notice.

Consumable Parts (Table 9)

Description
Pickup roller
Feed roller
Retard roller
Separation cover
1
Item Numbers and Part Numbers are subject to change due to engineering changes, etc.
3
Estimated average values in the field, based on the number of sheets separated, not the size of the sheets scanned. Data is subject
to change depending upon many factors including, without limitation, environment, and customer handling of the scanner
equipment.
imageFORMULA DR-G1130/DR-G1100 Series Service Guide
Rev. 1
imageFORMULA DR-G1130/DR-G1100 Series Service Guide
Part Number 1
For the scale adjustment (10 sheets/set)
TKM-0348
For the density adjustment (10 sheets/set)
TKM-0347
For the general image check (10 sheets/set)
TKM-0271
1
Item Number
MG1-4806-000
MA3-0002-000
MG1-4814-000
MF1-4799-000
Remarks
3
Expected Life
(sheets)
Approximately
450,000
sheets
Approximately
6,000,000
sheets
April 2013
Page 10