Rear Panel; Side Panel; Gas Cylinder Hook - Rinnai Coastal Customer's Operating And Assembly Instructions

9
SAFARI
Unpack and remove all protective packaging.
NOTE: The labels on the trolley legs indicate their
assembly position to the bottom shelf. LF=Left Front,
LR=Left Rear, RF=Right Front, and RR=Right Rear.
Labels should face inward toward each other when
correctly assembled. Remaining components cannot be
assembled if leg positions are incorrect.
2. Locate the four (4) trolley legs to the indicated corners
of the bottom shelf using eight (8)
Phillips-head screws. Do not fully tighten screws.
Ensure the door stopper mountings are facing the
front. Refer to diagram 1.
3. Locate barbecue body support brackets, facing
inward, to trolley legs on both sides using eight (8)
1 x 1
/ " / " Phillips-head screws. Fully tighten.
4 2
Refer to diagram 1.
Support
bracket
Door stopper mountings
A S S E
1 1
/ " 2 / "
4 x 2
Diagram 1.
Bottom
shelf
M B L Y
4. Screw the four (4) castors into the castor mounting
blocks in the bottom of each trolley leg. Turn the
threaded castor stem by hand, clockwise until it
stops. Fully tighten with the spanner provided.
Refer to diagram 2.
5. Install the two side panels and one rear panel to the
trolley by using four (4) of the
head screws on each panel.
screws loose. Refer to diagram 2.
Side
panel
Castor
6. Attach the door stopper to the bottom shelf, with
the flange facing the front, using two (2)
Phillips-head screws. Attach the gas cylinder hook
and support to the left side trolley legs using four
1 1
(4) / " x / " Phillips-head screws. Fully tighten.
4 2
Refer to diagram 3.
Door
stopper
9
3 1
/ " x / " Phillips-
16 2
Leave rear panel
Diagram 2.
Rear
panel
Side
panel
3 3
/ " x / "
16 8
Diagram 3.