Table of Contents
Advertisement
98
Intel AMT BIOS Extension menu
The first step in configuring a client system requires access to the Intel
AMT BIOS Extension Menu. The client system is the system that you
will access using Intel AMT. This system must be equipped with an Intel
PRO Network Connection which incorporates Intel AMT technology.
Before configuring the client system, you must have access to the
following information:
Note: The instructions in below are for systems using Microsoft
Windows; for other operating systems, consult your system OS
manual.
•
Computer name. Right-click My Computer, then click Properties
| Computer Name.
•
TCP/IP settings. Open the Control Panel, select Network
Connections, then right-click the network connection. Click
Properties | TCP/IP | Properties.
Enabling the IAMT BIOS Extension menu
1
Turn on the server and the monitor.
2
During POST, press F2 to access the BIOS Setup Utility.
3
Select the Server Management menu.
4
Change the setting of the ASF Support and Enter AMTBx Setup
fields to Enabled.
5
Press F10, and select Yes to save the changes made and close the
Setup Utility.
The AMT BIOS Extension Menu screen will be displayed after
system POST the next time the system boots up.
Note: After the initial IAMT BIOS configuration, only the Enable
AMTBx Setup option needs to be enabled for accessing the AMT
BIOS Extension Menu.
Appendix A: Intel Active Management Technology
Advertisement
Table of Contents
Troubleshooting
