42
Interleave
mode
DIMM1A
512 MB
1 GB
Dual
2 GB
channel
512 MB
1 GB
2 GB
To remove a memory module:
1
Perform the pre-installation instructions described on page 26.
2
Lay the server on its side (components showing).
3
If necessary, remove any cables that prevent access to the DIMM
slots.
4
Locate the memory module you intend to remove.
5
Remove the memory module.
(1) Press the retaining clips on both sides of the slot outward to
release the DIMM.
(2) Hold the DIMM by its edges, then gently pull it upward to
remove it.
6
Store the removed memory module inside an anti-static bag.
7
If you intend to install a new memory module, proceed to the next
section for related procedure, otherwise observe the
post-installation instructions described on page 26.
Channel A
DIMM2A
512 MB
1 GB
2 GB
Channel B
DIMM1B
DIMM2B
512 MB
1 GB
2 GB
512 MB
512 MB
1 GB
1 GB
2 GB
2 GB
3 System upgrade
Total
memory
1 GB
2 GB
4 GB
2 GB
4 GB
8 GB