Precautions; Transportation Security; Installation; Dismantlement - DH-Vision Auto-tracking High Speed Dome Camera User Manual

1. PRECAUTIONS

1.1. TRANSPORTATION SECURITY

No heavy stress, violent vibration or water splash are allowed during transportation,
storage. The unit should be transported in separated packing. In shipments of
distributor and delivery of maintenance, any damages caused by integral packing
are not covered by warranty.

1.2. INSTALLATION

Avoid heavy stress and violent vibration during installation. Don't touch the dome
cover directly by hand. When connecting the power source, please follow all electric
safety standards and only use the power supply designated for this device. Keep the
video and control signal in a decent distance from high voltage devices and cable.
Don't apply power to the dome before finishing the installation.

1.3. DISMANTLEMENT

Please don't dismantle the devices in the dome body. Only the professional
personnel authorized can operate the maintenance.

1.4. INTERNAL ENVIRONMENT

Keep metal and inflammable material away from dome body to avoid fire, short
circuit and damage. Please prevent all liquids material from entering the dome.
If occur this, please shut down the power and pull out the plug. Then inform the
technical personnel immediately.

1.5. ELECTRICAL SAFETY

The video image would be interfered when the dome is installed near television,
radio transmitter, voltage changer and audio amplifier.

1.6. CAMERA PROTECTION

Avoid shooting very bright objects directly into the camera's CCD (such as the sun
or light fittings).

1.7. CLEANING METHOD

Please don't use abrasive and violent detergent to clean the dome. Please choose
dry fabric and neutral detergent. Use lens paper to clean the lens.
1