DH-Vision Auto-tracking High Speed Dome Camera User Manual page 28

G. DOME TITLE
DOME SETTINGS
――――――――――――――
<IDLE>
<ALARM>
<AUX>
<PRIVACY MASK>
<CLOCK>
<PASSWORD>
<DOME TITLE>
<OTHERS>
BACK
EXIT
G1. INPUT
Move the cursor to INPUT and press IRIS ON to enter the title edition mode.
G2. Move the cursor to CAPS. Press IRIS ON and move the joystick upward and
downward to select capital and small letters.
G3. ALPHABET
Move the cursor to alphabet and press IRIS ON to select letters.
H. OTHERS
DOME SETTINGS
――――――――――――――
<IDLE>
<ALARM>
<AUX>
<PRIVACY MASK>
<CLOCK>
<PASSWORD>
<DOME TITLE>
<OTHERS>
BACK
EXIT
H1: TEMP CONTROL
Move the cursor to TEMP CONTROL and press IRIS ON to select the temperature
control mode as: COOL/AUTO/HEAT/OFF
H2: PRESET FREEZE
Move the cursor to PRESET FREEZE and press IRIS ON to set preset freeze function.
When the dome is shifting from one preset to another, the image on the monitor
will not change until the preset calling is done.
H3: AUTO FLIP
Move the cursor to AUTO FLIP and press IRIS ON to enable or disable auto flip
function.
H4. AUTO STOP TIME
The dome will stop PTZ move after a certain period when the stop code is not
received by dome. The period could be 5/15/30/60 seconds.
26
DOME TITLE SET
――――――――――――――
INPUT:<-_ _ _ _ _ _ _ _
CAPS
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z . <-
OK
CANCEL
OTHERS
――――――――――――――
TEMP CONTROL : COOL/AUTO/HEAT/OFF
PRESET FREEZE : OFF
AUTO FLIP : ON
AUTO STOP TIME : 30SEC
MENU OFF TIME : 5MIN
<NORTH SET>
BACK
EXIT
G1
G2
G3
H1
H2
H3
H4
H5
H6