DH-Vision Auto-tracking High Speed Dome Camera User Manual page 20

G. AUTO TRACKING
G1. AUTO TRACKING
Move the cursor to "AUTO TRACKING", press "iris on" key enter auto tracking
parameters setting.
G2. CROSS ALARM
Move the cursor to "CROSS ALARM", press "iris on" key enter cross alarm parameters
setting.
G3. LOSS DETECTION
Move the cursor to "LOSS DETECT", press "iris on" key enter loss detect parameters
setting.
G4. MANUAL DELAY TIME
This parameter means the time interval from manual ending to intelligent analysis
starting, move the cursor to "DELAY TIME" , press "iris on" key enter manual delay
time setting, through control joystick to set 1-20 seconds delay time.
G5. DSP VIDEO OUTPUT
Move the cursor to "DSP ENABLE", press "iris on" key enter turn on/off setting.
When select "ON" and turn on the intelligent analysis function, the OSD menu of
intelligent analysis function will overlay the image, and it will frame the object
when detect the object. When select the "OFF", The prompt information disappear
and display same as normal dome camera.
1. AUTO TRACKING FUNCTION
Function Overview:
It is used in auto tracking of moving object in the no man's land, such as: people,
cars, animals, also can achieve the function of area tracking and alarm
Operation Instruction:
18