DH-Vision Auto-tracking High Speed Dome Camera User Manual page 17

C. SEQUENCE
MOTION
――――――――――――――
<PRESET>
<SCAN>
<SEQUENCE>
<PATTERN>
<ZONES>
<TIMING ACTION>
<AUTO TRACKING>
BACK
EXIT
C1. SEQ NO.
Move the cursor to SEQ NO. and press the key IRIS ON(key on control keyboard) to
enter the edition mode of sequence No., move the joystick upward and downward
to select number. Then press IRIS ON to confirm.
C2. TITLE
Move the cursor to TITLE and press IRIS ON to enter the edition mode of sequence
title.
C3. START
MOVE the cursor to START and press IRIS ON to start the current sequence.
C4. <SEQUENCE SET>
Press IRIS ON to enter into the sequence setting
SEQUENCE
――――――――――――――
SEQ NO. : 1
TITLE : SEQ 1
START
<SEQUENCE SET>
DELETE
BACK
EXIT
Move the cursor to EDIT and press IRIS ON to enter edition mode. Move the joystick
rightward and leftward to select item.
a. When the < > is on the item NO., move joystick upward and downward to select
the NO.of the preset in a sequence. There are up to 32 presets in a single sequence.
b. When the < > is on the item PRESET, move the joystick upward and downward to
select the preset NO. you want to add in the sequence.
c. When the < > is on the item INS, move the joystick upward and downward to
select edition mode as "insert", "ok" and "delete".
d. Press IRIS OFF to quit the edition.
SEQUENCE
――――――――――――――
SEQ NO. : 1
TITLE : SEQ 1
START
<SEQUENCE SET>
DELETE
BACK
EXIT
SEQUENCE
――――――――――――――
NO.
INTERVAL
PRESET
>>
0 1 0 0 2
0 3
0 2
0 0 1 0 3
- - - - -
0 3
0 4 - - - - -
- - - - -
0 5
0 6 - - -
- -
EDIT INS
0 1 0 0 3 0 3
BACK EXIT
C1
C2
C3
C4
C5
15