Table of Contents
Advertisement
Indoor Unit Installation
Installation Instructions - Indoor Unit
PRIOR TO INSTALLATION
Before installing the indoor unit, refer to the label
on the product box to make sure that the model
number of the indoor unit matches the model
number of the outdoor unit.
Step 1: Select installation location
Before installing the indoor unit, you must choose
an appropriate location.
The following are standards that will help you
choose an appropriate location for the unit.
Proper installation locations meet the follow-
ing standards:
Good air circulation
Convenient drainage
Noise from the unit will not
disturb other people
Firm and solid-the location will
not vibrate
Strong enough to support the
weight of the unit
A location at least 3.5 feet from
all other electrical devices
(e.g., TV, radio, computer)
DO NOT install unit in the following locations:
Near any source of heat, steam, or
combustible gas
Near fammable items such as
curtains or clothing
Near any obstacle that might block
air circulation
Near the doorway
In a location subject to direct
sunlight
NOTE ABOUT WALL HOLE:
If there is no fixed refrigerant piping:
While choosing a location, be aware that you
should leave ample room for a wall hole (see
Drill wall hole for connective piping step) for
the signal cable and refrigerant piping that con-
nect the indoor and outdoor units. The default
position for all piping is the right side of the indoor
unit (while facing the unit). However, the unit can
accommodate piping to both the left and right.
39
Hide quick links:
Advertisement
Table of Contents
