Timer Operation - Mirage IVEH121A Owner's Manual

Timer operation

Press the TIMER ON button can set the auto-on
time of the unit. Press the TIMER OFF button can
set the auto-off time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset the
Auto-on time to START the operation.
2. Push the TIMER ON button again to set de-
sired Auto-on time. Each time you press the but-
ton, the time increases by half an hour between
0 and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER ON, there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the signal
"h" will disappear and the set temperature will
re-appear on the LCD display window.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set
desired Auto-off time. Each time you press
the button, the time increases by half an hour
between 0 and 10 hours and by one hour be-
tween 10 and 24 hours.
3. After setting the TIMER OFF, there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the signal
"H " will disappear and the set temperature will
re-appear on the LCD display window.
25