Test Run - Mirage IVEH121A Owner's Manual

Test Run

BEFORE TEST RUN
Only perform test run after you have
completed the following steps:
• Electrical Safety Checks - Confirm
that the unit's electrical system is safe
and operating properly.
• Gas Leak Checks - Check all fare nut
connections and confirm that the sys-
tem is not leaking.
• Confirm that gas and liquid (high and
low pressure) valves are fully open.
TEST RUN INSTRUCTIONS
You should perform the Test Run for at
least 30 minutes.
1. Connect power to the unit.
2. Press the ON/OFF button on the re-
mote controller to turn it on.
3. Press the MODE button to scroll
through the following functions, one at a
time:
• COOL - Select lowest possible
temperature
• HEAT - Select highest possible
temperature
4. Let each function run for 5 minutes, and
perform the following checks:
60