Attaching and aligning the appliance
First tighten the turnbuckles with an open-ended
1.
spanner, and then turn them approximately four
times to open them.
Note: Do not open the turnbuckles fully, otherwise
they may fall inside the appliance.
Enlist the help of a second person to lift the
2.
appliance and thread the cables into the turnbuckles
on the top of the machine.
Note: Never shorten the cables.
Taking care to comply with the safety clearances,
3.
slide the appliance up and level it.
If you need to position the appliance lower down, lift
4.
it up
, push the turnbuckles down
¨
cables back out of the turnbuckles
and pull the
©
.
ª
Once you have repositioned the appliance, use an
5.
open-ended spanner (WAF 7) to tighten the
turnbuckles.
Installation en
17
Need help?
Do you have a question about the I38KHV2S0 and is the answer not in the manual?