Assembly - Fakir CL 220 Dry Type Instruction Manual

Assembling
ASSEMBLING
Please ensure that the mains plug is disconnected
before assembling the parts otherwise the appliance
might start up unintentionally and cause injury.
Unpack the appliance and all its accessoires. Check the
contents of all accessoires.
Fig. 2
Always trnasport or ship the appliance in its original
packaging to avoid damage. Keep the packing for such
an event.
Before use;
•
Insert the end of the suction hose (Fig. 2) in the intake
opening of the vacuum cleaner, until it locks with an
Fig. 3
audible click.
•
Insert the handle (Fig. 3/1) into the upper end of the
telescopic tube (Fig. 3/2).
•
Attach the floor nozzle (Fig. 3/3) to the bottom end of the
telescopic tube (Fig. 3/4)
•
Adjust the length of the telescopic tube. Press down the
release latch on the tube (Fig. 4/1) to do this, then pull the
handle handle of the telescopic tube to extend (Fig. 3/1)
it to your desired length.
Fig. 4
Be careful during pulling the cord out, the yellow mark
on the cord show the end of the cord.
WARNING!
NOTICE!
ATTENTION!
WARNING!
GB
29