Aparatus - Fakir CL 220 Dry Type Instruction Manual

TR
Fig. 8
30

APARATUS

Besides the floor nozzle you just attached, you may extend
the functions of your vacuum cleaner with other nozzles.
The combi brush and the crevice nozzle:
You can store them in the accessory compartment when not
in use (Fig. 5)
• Combi Brush (Fig. 6/1): Use this to remove the dust from
objects with delicate surfaces (e.g. cupboards and tables)
• Crevice Nozzle (Fig. 6/2): Use this to suck dust out of hard
to reach places.
Fig. 5
Optionally available:
• TTurbo Brush (Fig. 7): This is equipped with a rotating brush
head and is thus ideally suited for the thoroughly deep
cleaning of carpets.
The high speed of the rotating brush causes a loud
noise during operation.
Fig. 6
• Parquet Brush (Fig. 8): This has long bristles making it
especially suitable for cleaning delicate surfaces.
Fig. 7
Only attach nozzles when the vacuum cleaner is not
connected to the mains. The appliance could be
switched on by accident.
This is how you attach the nozzles:
1) Switch off the vacuum cleaner and pull the plug from the
mains socket.
2) Pull the atached nozzle off of the telescopic tube.
3) Attach the required nozzle to the bottom end of the telescopic
tube (Fig. 9/1).
Using the vacuum cleaner without a nozzle attached
increases the danger of accidentally sucking in objects.
4) If possible, store nozzles no longer in use on the accessory
bracket.
Fig. 9
WARNING!
WARNING!
WARNING!